Kirjeldus
Vaata Raymarine AIS seadmete ja VHF raadiote tootetutvustust.
MMSI numbri saad tellida Tarbijakaitse ja Tehnilise Järelvalve Ametist
https://ttja.ee/eraklient/side-ja-meediateenused/raadioside/vee-ja-ohusoiduki-raadioload
ENHANCED SITUATIONAL AWARENESS WITH AIS700
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver
designed for use with any multifunction navigation display systems. As a Class B AIS transceiver,
the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s
information too helping you to be seen on other vessels’ systems.
KEY FEATURES
- Full transmit and receive AIS for enhanced situational awareness and safety
- Latest SO-TDMA technology for longer range and faster performance
- Built-in antenna splitter simplifies installation with existing VHF radio antenna
- NMEA2000, NMEA0183, PC (setup & diagnostics) and SeaTalkng compatible
- Software or hardware switchable Silent Mode for enhanced security when needed.
TECHNICAL DATA
DSC Receiver | Implemented by time sharing with one TDMA receiver |
Receiver 1 band | 156.025 MHz to 162.025 MHz (in 25KHz steps) |
Receiver 2 band | 156.025 MHz to 162.025 MHz (in 25KHz steps) |
Transmitter band | 156.025 MHz to 162.025 MHz (in 25KHz steps) |
Transmitter specification | To meet IEC 62287-2 relevant sections |
Receiver specification | To meet IEC 62287-2 relevant sections |
Transceiver specification | To meet IEC 62287-2 relevant sections |
GPS receiver | u-blox MAX-M8W |
GPS receiver channels | 72 channels |
GPS Cold start acquisition time | 26s nominal |
Positional source | GPS & GLONASS |
AIS performance | 5W SOTDMA |
AIS700 WHAT’S IN THE BOX
IN THE BOX | |||
1 | AIS700 Class B AIS Transceiver with built-in VHF antenna splitter | ||
2 | GNSS (GPS) Antenna | ||
3 | Power / data cable 2m (6.56 ft) | ||
4 | VHF Radio cable 1m (3.28 ft) | ||
5 | DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft) | ||
6 | GNSS antenna gasket | ||
7 | GNSS antenna pole mount | ||
8 | Unit fixings (4 x No.8×19 self tapping screws) | ||
9 | M5 nut and washer (grounding) | ||
10 | Documentation kit | ||
11 | GNSS antenna fixings (3 x M3x40 stud and thumb nut) | ||
12 | Software CD |