Raymarine: Sale. There is always something at a good price! - NavSystems https://raymarine.ee/en/product-category/campaigns/ Marine electronics, chartplotter, autopilot, stern pilot, steering pilot, radar, AIS, VHF, Smart Wind Sun, 12 Jul 2026 16:26:44 +0000 en-GB per hour 1 https://wordpress.org/?v=7.0.2 https://raymarine.ee/wp-content/uploads/2024/10/Screenshot-2024-10-15-151324_bg_removed-100x100.webp Raymarine: Sale. There is always something at a good price! - NavSystems https://raymarine.ee/en/product-category/campaigns/ 32 32 238308716 RVM-400 RealVision 3D Max 0° single transducer https://raymarine.ee/en/product/rvm-400-realvision-3d-max-0-uk-sia-andur/ Sat, 13 Jun 2026 05:24:39 +0000 https://raymarine.ee/?post_type=product&p=12371 The RVM-400 through-hull stainless steel transducer allows for easy detection of underwater objects, sub-surface structures, and fish with the lifelike clarity of RealVision Max 3D™ sonar. The RVM-400 system is a four-channel, wide-spectrum CHIRP transducer system with DownVision™, SideVision™, high-frequency CHIRP fish targeting, and RealVision Max 3D™ sonar. The RVM transducer has a built-in Attitude and Heading Reference System (AHRS). This system stabilises sonar imagery by automatically compensating for vessel motion, delivering crystal-clear images even in rough seas and during manoeuvres. The RVM-400 system has a built-in, fast-responding water temperature sensor. The Raymarine RVM-400 through-hull transducer pack includes one RealVision 3D Max transducer with its internal elements set at a 0° angle relative to the outer housing, making it suitable only for boats with smooth hulls. The low-profile, hydrodynamic transducer glides through the water with minimal drag and turbulence. Be sure to consult the product manuals and seek advice from our specialists if you have any questions.

The post RVM-400 RealVision 3D Max 0° üksik andur appeared first on NavSystems.

]]> When installing Raymarine RVM transducers, consider the following:

RealVision Max 3D™ andurid tagavad maksimaalse sonaripildi detailsuse ja täpsuse ainult siis, kui need on õigesti paigaldatud. Lisaks ametlikule paigaldusjuhendile järgi kindlasti järgmisi põhimõtteid:

1. Select the correct power supply – this is the utility battery

Do not connect Axiom2 Pro RVM-i Attach the RVM1600 sonar module to the starter crank.. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Depth below waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

4. Effect of magnetic fields on the AHRS system

RVM users have Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

  • Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

  • When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RVM andurid ei sobi Axiom+ RV, Axiom2 RV ja Axiom Pro RVX mudelitega.

RVM-400 stainless steel through-hull transducer with 8 m cable

RVM-400 seeria anduritel on DownVision™, SideVision™, 600-vatine kõrge CHIRP-sagedusega signaal ja 3D-sonari tugi. Anduril on sisseehitatud asendi ja suuna viitesüsteem (AHRS), mis stabiliseerib 3D-sonari kujutisi, kompenseerides automaatselt aluse liikumist. RVM-400 seerial on ka sisseehitatud kiire reageerimisega veetemperatuuri andur kiirete ja täpsete näitude saamiseks.

RVM-400 is a single sensor designed for boats with a 0° hull deadrise, such as skiffs, flat-bottomed (or partial-bottomed) workboats, etc. 

The RVM-400 anduril features 0° sonar elements within surface-mount housings and the sensor is designed for installation on a flat, perpendicular-to-the-water-surface base or part thereof. The kit includes an 8-metre sensor cable.    

Works with Axiom 2 Pro RVM series and RVM1600 external sonar module

Features:

  • 600W traditional CHIRP
  • High-performance Down and SideVision elements
  • Aerodynamic housing with insulation board
  • 8m cable
  • The RVM-400 adapter is suitable for a boat hull with a 0° angle.


Instructions:

Download RVM-400 RealVision Max 3D Andurite paigaldusjuhend

Download RVM-400 RealVision Max 3D Mounting template

The post RVM-400 RealVision 3D Max 0° üksik andur appeared first on NavSystems.

]]> 12371 Alpha Performance Display wall mount https://raymarine.ee/en/product/alpha-performance-display-mount/ Sat, 06 Jun 2026 06:25:59 +0000 https://raymarine.ee/?post_type=product&p=12262 Selleks, et terve meeskond saaks Alpha Performance instrumente igas olukorras jälgida oleks mõistlik need paigutada kokpitis kajuti ukse juurde või võimalusel masti külge. Masti külge paigaldamisel on heaks abiliseks erinevad mastikinnitused. Võimalus on valida 2 erineva mõõdu, 7" ja 9" ja kolme erineva paigutuse vahel, kokku 6 erinevat mastikinnitust. Variandid on: Üksik vertikaalne, üksik horisontaalne, kaksik horisontaalne. Tutvu kindlasti ka selle toote juhenditega ja küsimuste korral pea nõu meie spetsialistiga.

Select the option that suits you from the drop-down menu.

The post Alpha Performance Display mastikinnitus appeared first on NavSystems.

]]> Raymarine Alpha Performance Display mast bracket

Alpha Performance Displays are the most versatile navigation data displays. High-visibility touch screens with wide viewing angles ensure excellent visibility from anywhere on board. Alpha's extensive range of data pages and widgets ensures quick and easy display of sailing, navigation, and engine data. Alpha Performance Displays are remotely controlled from Axiom series chartplotters.

For the entire team to be able to monitor the Alpha Performance instruments in every situation, it would be sensible to place them in the cockpit near the cabin door or, if possible, on the mast. When installing on the mast, various mast mounts are a good aid. There is a choice of two different sizes, 7″ and 9″, and three different layouts, making a total of 6 different mast mounts. The options are: single vertical, single horizontal, twin horizontal. The mast mount leaves a sufficient gap between the mast and the Alpha displays to accommodate the lines on top of the mast. Alpha Performance display mast mounts are made of aluminium and coated with black powder paint.

Instructions:

Download Alpha Performance Display Installation guide

Download the Alpha Performance Display Mast Bracket Installation guide

The post Alpha Performance Display mastikinnitus appeared first on NavSystems.

]]> 12262 RVM-412 RealVision 3D Max sensor pair with 12° field of view https://raymarine.ee/en/product/rvm-412-realvision-3d-max-12-nurgaga-andurite-paar/ Mon, 01 Jun 2026 08:47:08 +0000 https://raymarine.ee/?post_type=product&p=12101 The RVM-412 through-hull transducer pair, made from stainless steel, allows easy detection of underwater objects, underwater structure and fish finding with the lifelike imagery of RealVision Max 3D™ sonar. The RVM-412 system is a four-channel, wide-spectrum CHIRP transducer system with DownVision™, SideVision™, high-frequency CHIRP fish targeting and RealVision Max 3D™ sonar. The transducer system features a built-in Attitude and Heading Reference System (AHRS). This system stabilises the sonar imagery by automatically compensating for vessel motion, resulting in a crystal-clear image even in waves and during manoeuvring. The RVM-412 system includes a built-in, fast-response water temperature sensor. The Raymarine RVM-412 through-hull transducer kit includes two RealVision 3D Max transducers with their internal elements angled relative to the outer casing, an angle suitable for boat hull angles between 5° and 15°. The low-profile, hydrodynamic transducers glide through the water without creating drag or turbulence. Be sure to consult the product manuals and contact our specialists if you have any questions.

The post RVM-412 RealVision 3D Max 12° nurgaga andurite paar appeared first on NavSystems.

]]> When installing Raymarine RVM transducers, consider the following:

RealVision Max 3D™ andurid tagavad maksimaalse sonaripildi detailsuse ja täpsuse ainult siis, kui need on õigesti paigaldatud. Lisaks ametlikule paigaldusjuhendile järgi kindlasti järgmisi põhimõtteid:

1. Select the correct power supply – this is the utility battery

Do not connect Axiom2 Pro RVM-i Attach the RVM1600 sonar module to the starter crank.. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Precise and symmetrical installation is critically important!

  • The hardware must be installed exactly parallel, the same distance from the stern of the boat.

  • If one sensor is ahead of or behind another, The sonar image is shifting..

  • Andurite The distance must not exceed 2 metres (preferably up to 1 metre on either side of the wedge).

4. Depth below the waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

5. Effect of magnetic fields on the AHRS system

RVM users have Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

  • Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

  • When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RVM andurid ei sobi Axiom+ RV, Axiom2 RV ja Axiom Pro RVX mudelitega.

RVM-412 stainless steel thru-hull transducer pair, 12-degree angle, 2 m Y-cable and 8 m extension cable

RVM-400 seeria anduritel on DownVision™, SideVision™, 600-vatine kõrge CHIRP-sagedusega signaal ja 3D-sonari tugi. Anduril on sisseehitatud asendi ja suuna viitesüsteem (AHRS), mis stabiliseerib 3D-sonari kujutisi, kompenseerides automaatselt aluse liikumist. RVM-400 seerial on ka sisseehitatud kiire reageerimisega veetemperatuuri andur kiirete ja täpsete näitude saamiseks.

The RVM-412 is a pair of starboard and port transducers designed for boats with a hull deadrise of 5° to 15°. Each transducer element is tilted 12° to compensate for the hull deadrise. 

The RVM-412 transducers have skewed sonar elements inside surface-mount housings. The skewed elements ensure proper alignment of the sonar beam for maximum performance, while eliminating the obstruction and turbulence associated with transducer installation behind a blocking fairing. The kit includes a Y-cable that internally connects the two transducers and an 8-meter RV(M) transducer extension cable.    

Works with Axiom 2 Pro RVM series and RVM1600 external sonar module

Features:

  • 600W traditional CHIRP
  • High-performance Down and SideVision elements
  • Aerodynamic housing with insulation board
  • 2M Y-cable
  • 8M extension lead
  • RVM-412 andurid are suitable for boat bottoms with a 5°-15° angle.


Instructions:

Download RVM-400 RealVision Max 3D Andurite paigaldusjuhend

Download RVM-400 RealVision Max 3D Mounting template

The post RVM-412 RealVision 3D Max 12° nurgaga andurite paar appeared first on NavSystems.

]]> 12101 RVM-420 RealVision 3D Max 20° camera pair https://raymarine.ee/en/product/rvm-420-realvision-3d-max-20-nuggag-andurite-paar/ Mon, 01 Jun 2026 06:51:51 +0000 https://raymarine.ee/?post_type=product&p=12096 The RVM-420 stainless steel through-hull transducer pair allows for easy identification of underwater objects, submerged structures, and fish with the lifelike imagery of RealVision Max 3D™ sonar. The RVM-420 system is a four-channel, wide-spectrum CHIRP transducer system, featuring DownVision™, SideVision™, high-frequency CHIRP fish targeting, and RealVision Max 3D™ sonar. The transducer system has a built-in attitude and heading reference system (AHRS). This system stabilises the sonar imagery by automatically compensating for vessel motion, resulting in crystal-clear imagery even in waves and during manoeuvres. The RVM-420 system features a built-in, fast-response water temperature sensor. The Raymarine RVM-420 through-hull transducer kit includes two RealVision 3D Max transducers where the internal elements are angled relative to the outer housing, and this angle is suitable for boat hull angles between 15° and 25°. The low-profile, hydrodynamic transducers glide through the water freely, without creating drag or turbulence. Be sure to consult the product's manuals and contact our specialists if you have any questions.

The post RVM-420 RealVision 3D Max 20° nurgaga andurite paar appeared first on NavSystems.

]]> When installing Raymarine RVM transducers, consider the following:

RealVision Max 3D™ andurid tagavad maksimaalse sonaripildi detailsuse ja täpsuse ainult siis, kui need on õigesti paigaldatud. Lisaks ametlikule paigaldusjuhendile järgi kindlasti järgmisi põhimõtteid:

1. Select the correct power supply – this is the utility battery

Do not connect Axiom2 Pro RVM-i Attach the RVM1600 sonar module to the starter crank.. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Precise and symmetrical installation is critically important!

  • The hardware must be installed exactly parallel, the same distance from the stern of the boat.

  • If one sensor is ahead of or behind another, The sonar image is shifting..

  • Andurite The distance must not exceed 2 metres (preferably up to 1 metre on either side of the wedge).

4. Depth below the waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

5. Effect of magnetic fields on the AHRS system

RVM users have Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

  • Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

  • When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RVM andurid ei sobi Axiom+ RV, Axiom2 RV ja Axiom Pro RVX mudelitega.

RVM-420 stainless steel thru-hull transducer pair, 20-degree tilt, with 2m Y-cable and 8m extension cable

RVM-400 seeria anduritel on DownVision™, SideVision™, 600-vatine kõrge CHIRP-sagedusega signaal ja 3D-sonari tugi. Anduril on sisseehitatud asendi ja suuna viitesüsteem (AHRS), mis stabiliseerib 3D-sonari kujutisi, kompenseerides automaatselt aluse liikumist. RVM-400 seerial on ka sisseehitatud kiire reageerimisega veetemperatuuri andur kiirete ja täpsete näitude saamiseks.

The RVM-420 is a pair of starboard and port transducers designed for boats with hull deadrise angles of 15° to 25°. Each transducer element is tilted 20° to compensate for the hull's deadrise. 

The RVM-420 transducers have their sonar elements offset within the surface-mount housings. The offset elements ensure the sonar beams are aimed correctly for maximum performance, while eliminating the obstruction and turbulence associated with installing a transducer with a blocked dome. The kit includes a Y-cable that internally connects the two transducers and an 8-meter RV(M) transducer extension cable.    

Works with Axiom 2 Pro RVM series and RVM1600 external sonar module

Features:

  • 600W traditional CHIRP
  • High-performance Down and SideVision elements
  • Aerodynamic housing with insulation board
  • 2M Y-cable
  • 8M extension lead
  • The RVM-420 andurid are suitable for the bottom of a boat with a deadwood angle between 15°-25°.


Instructions:

Download RVM-400 RealVision Max 3D Andurite paigaldusjuhend

Download RVM-400 RealVision Max 3D Mounting template

The post RVM-420 RealVision 3D Max 20° nurgaga andurite paar appeared first on NavSystems.

]]> 12096 ST4000 MKII Spare part (drive only) https://raymarine.ee/en/product/spares-for-ev-100-st4000-mkii-drive-only/ Sat, 30 May 2026 06:58:26 +0000 https://raymarine.ee/?post_type=product&p=12034 The kit includes the ST4000 MK2 drive unit, mounting hardware and power cable, the ACU-100, EV1 and p70s are not included. The drive unit is fully sealed and fits most wheels. A simple manual clutch mechanism allows for quick disengagement and ensures smooth steering.

Technical data:

  • Maximum recommended boat weight: 7,500 kg
  • Revolutions per minute (rpm): 9
  • Torque: 30 Nm
  • The ACU-100 control unit is suitable for the drive.

 

Tutvu kindlasti ka selle toote juhenditega ja vajadusel pea nõu meie spetsialistiga.

The post ST4000 MKII varuosa (ainult ajam) appeared first on NavSystems.

]]> Raymarine Wheel Pilot component - for tiller-driven yachts weighing up to 7,500 kg.

ST4000 MK2 autopilot drive unit kit only

The kit includes the ST4000 MK2 drive unit, mounting hardware and power cable, the ACU-100, EV1 and p70s are not included. The drive unit is fully sealed and fits most wheels. A simple manual clutch mechanism allows for quick disengagement and ensures smooth steering.

Technical data:

  • Maximum recommended boat weight: 7,500 kg
  • Revolutions per minute (rpm): 9
  • Torque: 30 Nm
  • The ACU-100 control unit is suitable for the drive.

 

The Raymarine EV-100 Autopilot is a reliable and smart choice for any small boat captain looking for simpler and more efficient navigation. If the existing autopilot drive has malfunctioned, it is worth considering a small repair, as most necessary spare parts are always in stock.

Download EV-100 Autopilot Installation Guides:

EV1 and ACU Installation guide

ST4000 MK II steering gear Installation guide

p70s and p70Rs Installation guide

Steering angle sensor Installation guide

Evolution p70 and p70Rs pilot user and operating manual

Added:

We recommend adding a steering angle sensor as well. M81105.

Further information about autopilots can be found Raymarine from the website

The post ST4000 MKII varuosa (ainult ajam) appeared first on NavSystems.

]]> 12034 RVM-100 RealVision Max 3D transducer with 8m cable https://raymarine.ee/en/product/rvm-100-realvision-max-3d-ahtriandur-8m-cable/ Wed, 06 May 2026 12:43:38 +0000 https://raymarine.ee/?post_type=product&p=11166 With the Raymarine RVM-100 RealVision 3D transom transducer, you can experience next-generation sonar performance. This innovative transducer combines the latest technologies to give you unparalleled visibility beneath the water's surface. The RVM-100 transducer is equipped with an AHRS sensor that stabilises the sonar image. The RVM-100 transom transducer features DownVision, SideVision, and RealVision MAX 3D technologies. Be sure to consult the product manual and seek advice from our specialists if you have any questions.

The post RVM-100 RealVision Max 3D ahtriandur 8m kaabliga appeared first on NavSystems.

]]>

RVM andurid ei sobi Axiom+, Axiom2 ja Axiom Pro RVX mudelite ja RVX1000 välise sonarimooduliga.

RVM transducers are compatible with the Raymarine Axiom2 Pro RVM series and the external RVM1600 RealVision 3D MAX fishfinder module! Experience the efficiency of next-generation sonar with the Raymarine RVM-100 transom transducer. This innovative transducer combines the latest technologies to give you unparalleled underwater visibility.

Precise identification with RealVision MAX 3D Sonar:

  • 4-channel wideband CHIRP for detailed fish and structure detection
  • DownVision™ kõrgresolutsiooniga piltide saamiseks otse paadi all
  • SideVision™ laiaulatusliku sonarivaatluse jaoks paadi küljelt
  • RealVision MAX 3D™ hingematvate 3D-vaadete saamiseks veealusest maailmast


Stabilised images and reliable data

  • The integrated AHRS (Attitude Heading Reference System) stabilises sonar images and eliminates camera shake.
  • High-precision water temperature sensor
  • Durable stainless steel clamp for easy installation and durability


Perfectly suited for demanding anglers and boaters:

  • Ideal for searching for fish, exploring structures and navigating unknown waters
  • Advanced sonar technology, providing an incredible image of the underwater world
  • Durable construction for use in harsh conditions

Experience the future of sonar with the Raymarine RVM-100 and dive into a world of possibilities.

Technical data

Sonar channels DownVision, SideVision, RealVision MAX 3D, CHIRP 600 W @ 200 kHz.
Andur AHRS (Attitude and Heading Reference System).
Speed range 200 kHz: 12°
Dimensions: width x height: 256.6 (10.1") x 120.5 (4.74")
Cable length: Cable length: 8 metres
Weight: 8.5 kg 0.647 kg (including bracket)
IP rating IPX6 (for parts located outside the boat), IPX7, IPX8.
Storage temperature -20 °C -70 °C
Operating temperature: -2 °C to +55 °C
Depth ranges:
Chirp
DownVision
SideVision
RealVision Max 3D		 0.6 to 365 metres
0.6 to 182 metres
0.6 to 91 metres
0.6 to 91 metres

Compatibility Fully compatible Raymarine Axiom2™ Pro RVM series of multi-functional displays and external RVM1600 RealVision 3D MAX with a colour finder module.

Raymarine RVM-100 A top-class choice for boats with outboard engines – ideal for both amateur anglers and demanding professionals who want to get the best possible view of the underwater world.

Instructions:

Download RVM-100 atriums Installation guide

The post RVM-100 RealVision Max 3D ahtriandur 8m kaabliga appeared first on NavSystems.

]]> 11166 i50 Tridata Pack https://raymarine.ee/en/product/i50-tridata-pack/ Sat, 11 Apr 2026 07:13:09 +0000 https://raymarine.ee/?post_type=product&p=9698 Raymarine i50 Tridata and i60 Wind pack

Raymarine i50 Tridata ja i60 tuulekomplekt sisaldab kõike vajalikku tuule-, kiiruse-, sügavuse- ja temperatuuri süsteemi loomiseks. Komplektis on i50 ja i60 instrumendid mis kuvavad andmeid selgelt ja täpselt. Komplektis olev lühikese varrega Wind Vane tuuleandur ühendub komplekti kuuluva 30-meetrise mastikaabliga otse i60 instrumendi külge. Komplektis olevad analoogväljundiga P120 ja P319 kiiruse/temperatuuri- ja sügavuse andurid paigaldatakse läbi põhja ja soovitatavalt kiilu ette. Mõlemad  läbi põhja andurid ühendatakse otse i50 Tridata instrumendi külge. Tutvu kindlasti ka selle komplekti juhenditega ja küsimuste korral pea nõu meie spetsialistiga.

The post i50 Tridata Pack appeared first on NavSystems.

]]> Raymarine i50 Tridata system

The Raymarine i50 Tridata instrument pack contains everything needed to create a speed, depth and temperature system. Included is the i50 Tridata instrument that displays data clearly and accurately. The P120 and P319 through-hull speed/temperature and depth transducers with analogue output are fitted through the hull, ideally ahead of the keel, and connect directly to the i50 Tridata instrument. A cable is included to connect the i50 Tridata instrument to an existing SeaTalk1 network. If your boat does not have an existing SeaTalk1 network, has no free SeaTalk1 sockets, or you plan to connect this pack to an STNG network, please consult us before purchasing as you will require additional cables or adaptors.

Main Features: 
  • Large dials
  • Red backlighting for improved visibility
  • SeaTalk and SeaTalkNo connections
  • NMEA2000 (compatible) connections
  • Speed and Depth Transducer Ports
  • Low power consumption
  • Supports multiple data sources, thus eliminating potential data loops
  • Front mounting for easy installation
  • Delivered with a black and grey frame

Specifications

Nominal Voltage 12V DC
Voltage range 10-16V DC
Power consumption Typical <1W (display only) and 2.4W with transducer connected
Power consumption 45 to 65mA (display only) and 200mA with transducer connected
Operating temperature -20°C to +55°C
Storage temperature -30°C to +70°C
Relative humidity up to 93%
Water rating IPX6
Connections 2x SeaTalkNo and transducer (E70058 only)
Compliance Europe 2004/108/EC
Included i50 instrument, front panel, SeaTalkNo Drop cable, seal, cover, documentation, SeaTalkNo dummy cap, 4 x screws

Instructions:

Download i50 Installation and User Guide

Download P319 Depth Sensor Installation Guide

Download P120 speed and temperature sensor installation guide

The post i50 Tridata Pack appeared first on NavSystems.

]]> 9698 i50 Tridata and i60 Wind Pack https://raymarine.ee/en/product/i50-tridata-and-i60-wind-pack/ Fri, 27 Mar 2026 13:56:34 +0000 https://raymarine.ee/?post_type=product&p=8893 Raymarine i50 Tridata and i60 Wind pack

Raymarine i50 Tridata ja i60 tuulekomplekt sisaldab kõike vajalikku tuule-, kiiruse-, sügavuse- ja temperatuuri süsteemi loomiseks. Komplektis on i50 ja i60 instrumendid mis kuvavad andmeid selgelt ja täpselt. Komplektis olev lühikese varrega Wind Vane tuuleandur ühendub komplekti kuuluva 30-meetrise mastikaabliga otse i60 instrumendi külge. Komplektis olevad analoogväljundiga P120 ja P319 kiiruse/temperatuuri- ja sügavuse andurid paigaldatakse läbi põhja ja soovitatavalt kiilu ette. Mõlemad  läbi põhja andurid ühendatakse otse i50 Tridata instrumendi külge. Tutvu kindlasti ka selle komplekti juhenditega ja küsimuste korral pea nõu meie spetsialistiga.

The post i50 Tridata ja i60 Wind Pack appeared first on NavSystems.

]]> Raymarine i50 Tridata and i60 Wind pack

The Raymarine i50 Tridata and i60 Wind instrument pack contains everything you need to create a wind, speed, depth, and temperature system. The pack includes i50 and i60 instruments that display data clearly and accurately. The included short-arm Wind Vane transducer connects directly to the i60 instrument with the supplied 30-metre mast cable. The included P120 and P319 speed/temperature and depth transducers with analogue output are through-hull mounted, preferably forward of the keel, and connect directly to the i50 Tridata instrument. The pack includes cables to connect the i50 and i60 instruments together, and a small adapter cable to connect the pack to an existing SeaTalk1 network. If your boat does not have an existing SeaTalk1 network, has no free SeaTalk1 slots, or you plan to connect this pack to an STNG network, please consult with us before purchasing, as you will definitely need additional cables or adapters.

Main Features: 
  • Large dials
  • Red backlighting for improved visibility
  • SeaTalk and SeaTalkNo connections
  • NMEA2000 (compatible) connections
  • Transducer port
  • 30 metre mast cable
  • 110 mm x 115 mm – the same dimensions as the Raymarine ST60+ instrument series
  • Low power consumption
  • Supports multiple data sources, thus eliminating potential data loops
  • Front mounting for easy installation
  • Delivered with a black and grey frame

Specifications

Nominal Voltage 12V DC
Voltage range 10-16V DC
Power consumption Typical <1W (display only) and 2.4W with transducer connected
Power consumption 45 to 65mA (display only) and 200mA with transducer connected
Operating temperature -20°C to +55°C
Storage temperature -30°C to +70°C
Relative humidity up to 93%
Water rating IPX6
Connections 2x SeaTalkNo and transducer (E70061 only)
Compliance Europe 2004/108/EC
Included i60 instrument, front panel, SeaTalkNo Drop cable, masthead unit, 30 metre mast cable, P319-PZ Depth Tx, ST800 P120 Tx. i50 instrument, seal, cover, documentation, SeaTalkNo dummy cap, 4 x screws

Instructions:

Download i50 Installation and User Guide

Download i60 Installation and User Manual

Download Wind Vane Installation Guide

Download P319 Depth Sensor Installation Guide

Download P120 speed and temperature sensor installation guide

The post i50 Tridata ja i60 Wind Pack appeared first on NavSystems.

]]> 8893 i70s Smart Wind Pack – i70s, RSW, DST810 https://raymarine.ee/en/product/i70s-smart-wind-pack-i70s-rsw-dst810/ Fri, 27 Mar 2026 07:08:21 +0000 https://raymarine.ee/?post_type=product&p=8878 The Raymarine i70s Smart Wind instrument pack includes everything you need to display wind, speed, depth, and temperature readings. At the heart of the pack is the i70s colour display multi-instrument, which shows data clearly and accurately. The pack includes the new RSW Smart Wind transducer with an RSW gateway. The included DST810 smart transducer displays speed, depth, temperature, and also heel and trim. Be sure to consult the manuals for this pack and contact our specialist if you have any questions.

NB! RSW Wind Gateway mounting clamp PEAB to be connected to the boat's ground or, if that is not available, at least to the battery's negative terminal! This is very important, otherwise the RSW Gateway will break and in the worst case the RSW wind sensor will also break.

The post i70s Smart Wind Pack – i70s, RSW, DST810 appeared first on NavSystems.

]]> Raymarine i70s Smart Wind tridata unit

The Raymarine i70s Smart Wind instrument pack includes everything you need to display wind, speed, depth and temperature readings. At the heart of the pack is the i70s colour multi-instrument, which displays data clearly and accurately. The pack includes the new RSW Smart Wind transducer with the RSW gateway. The DST810 smart sensor included in the pack displays speed, depth, temperature, and also heel and trim. The iTC-5 is no longer required, the Smart Wind transducer Gateway connects directly to the STNG network. The DST810 is installed through-hull, preferably forward of the keel. Cables, T-connectors, and terminators are included in the pack to begin building your STNG network.

NB! RSW Wind Gateway mounting clamp PEAB to be connected to the boat's ground or, if that is not available, at least to the battery's negative terminal! This is very important, otherwise the RSW Gateway will break and in the worst case the RSW wind sensor will also break.

Tip: Install the cable for the wind sensor on the mast so that a “drip loop” is formed before the RSW Gateway. This will prevent rainwater and condensation from entering the RSW Gateway.

Contents of the kit:

  • E70327 i70s Multifunction Colour Display x 1
  • E70667 Airmar DST810 0° (NMEA2000) x 1
  • E70670 RSW-Wired Performance Wind x 1
  • STNG Backbone Terminator x 2
  • A06064 STNG 5-WAY CONNECTOR x 1
  • A06035 STNG Backbone Cable 3m x 1
  • A06049 STNG Power Cable x 1
  • STNG T-Piece Connector x 1

Features:

  • Clear and colourful i70s display.

  • RSW Smart Wind – Precise wind speed and direction measurement.

  • DST810 – Speed, depth, and temperature data from a single sensor.

  • Easy to integrate into the Raymarine SeaTalkNG network.

  • Includes all necessary cables and accessories for installation.

Instructions:

Download i70s Installation Guide

Download i70 and i70s User Manual

Download Raymarine RSW Wind Installation Guide

Download DST810 Installation Guide

Download STNG Network Installation Guide

The post i70s Smart Wind Pack – i70s, RSW, DST810 appeared first on NavSystems.

]]> 8878 Raymarine LightHouse merekaart MED (Mediterranean) https://raymarine.ee/en/product/raymarine-lighthouse-mediterranean-charts/ Sun, 13 Apr 2025 13:59:37 +0000 https://raymarine.ee/?post_type=product&p=8317

Raymarine Lighthouse charts (mSD), Mediterranean covers a large part of the Mediterranean region including Spain, France, Italy, Malta, Croatia, Slovenia, Montenegro, Morocco, Algeria, Tunisia, Libya, Greece, Turkey and Cyprus. These charts are based on data from official hydrographic sources, converted into Raymarine's own format. The benefits of the new chart software include exceptional clarity, greater functionality and enhanced imagery. Raymarine Lighthouse charts are suitable for devices using Lighthouse 3, 4 and 5 operating systems, Axiom, Axiom+, Axiom Pro, Axiom2 Pro, Axiom XL, Axiom2 XL and Element series. See more Raymarine LightHouse Regarding nautical charts. Raymarine equipment software is available for free download. The minimum software required for displaying LightHouse nautical charts is already present on the memory card. Raymarine LightHouse chart users can choose between four different display modes: Day, Dusk, Night, and Bright Sun. All these modes are designed to enhance overall clarity and reduce eye strain in various lighting conditions. Without altering the overall size of the nautical chart, the size of buoys, lights, and other navigation icons can be changed on Lighthouse nautical charts. The level of detail displayed on the nautical charts can also be adjusted, from only showing essential navigation aids (low) to adding other objects to varying degrees (high). NB! LightHouse chartplotter lacks the Auto-Route function!

A quick guide on how to download the LightHouse map can be found at the bottom of the page!

The post Raymarine LightHouse merekaart MED (Vahemeri) appeared first on NavSystems.

]]>
Raymarine LightHouse Nautical Charts (mSD), Mediterranean covers a large part of the Mediterranean region, including Spain, France, Italy, Malta, Croatia, Slovenia, Montenegro, Morocco, Algeria, Tunisia, Libya, Greece, Turkey, and Cyprus. These charts are based on data from official hydrographic sources, converted into Raymarine's own format. The advantages of the new chart software are exceptional clarity, greater functionality, and improved imaging. Raymarine Lighthouse Nautical Charts are suitable for devices using Lighthouse 3, 4, and 5 operating systems, the Axiom, Axiom+, Axiom Pro, Axiom2 Pro, Axiom XL, Axiom2 XL, and Element series. Check if your devices are up to date. The minimum update software .iso files required to display the LightHouse nautical chart are already present on the memory card. If your devices have been updated, you can delete the files containing the software from the memory card.
See Raymarine Teave laevateede kohta. Raymarine equipment software is available for free download. Before updating the software on your chart plotter or other navigation equipment, please read the guide on how to do so. Software update at your own risk.
Raymarine LightHouse chart users can choose between four different display modes: Day, Twilight, Night, and Bright Sunlight. All of these modes are designed to enhance overall clarity and reduce eye strain in varying light conditions. Without altering the overall chart size, Lighthouse charts allow for adjustments to the size of buoys, lights, and other navigational icons. The level of detail displayed on the charts can also be adjusted, from showing only the primary navigational aids (Low) to including other objects to varying degrees (High).
The source data for cartographic objects is sourced from recognised marine information providers, Reeds Almanac and Marinas.com. To make the most of this information, Raymarine has included a “Find Nearest...” feature with preset options that will guide you directly to the nearest marina, fuel dock, anchorage, repair yard, or beach. One very useful feature for which more advanced information will be available in the future is true tidal height and currents, which Raymarine is currently working on. Satellite imagery for the LightHouse charts is provided by Mapbox and can be added or removed as layers to cover just land, or both land and sea. In addition to visual appeal, where you can see the surrounding area in vivid photographic detail, down to individual streets, buildings, and parks, this is also a great way to avoid shallow depths and reefs.
It's possible to choose between pro and leisure presentation modes; the first is S-52 (Government Chart Style), a chart mode favoured by professional mariners for its very clean and comprehensive marine information, and practically devoid of any land information. The second is a more colourful and information-rich version that leisure boat owners can use to find ports, shops, and other points of interest.
There are two additional features, the first of which is designed primarily for fishing enthusiasts. This includes fishing areas checked by experts, which display detailed fishing information for different species, from the best spots, along with additional information, one-metre interval depth contours, and RealBathy mapping capabilities. This allows users to create their own sonar maps of uncharted areas using their fishfinder.
A further very useful feature of the LightHouse Chart is available when using the Raymarine Premium service, which allows plotter charts to be updated via a smart device. The Premium package also provides access to enhanced satellite imagery and a large, constantly updated database of points of interest (POI). This offers up-to-date information about marinas, fuel stations, boatyards, repair workshops, as well as nearby shopping centres and restaurants. The locations of Raymarine service points are also marked.

Changing the size of chart symbols independently of the zoom level. Without altering the overall size of the nautical chart, it is possible to change the size of, for example, buoys, lights, and other navigational icons. It is also possible to adjust the level of detail displayed on nautical charts, limiting it to only the main navigational aids (low) or adding less important points of interest to varying degrees (high).

QUICK START GUIDE: Thank you for your interest in Raymarine LightHouse Charts. The new chart needs to be downloaded and copied to the memory card directory supplied in the package. lighthouse_charts. To download the map, go to Raymarine ChartManager and create an account for yourself. Once you have opened the card packaging, you will find the card VOUCHER CODE. Select the command from the ChartManager homepage: Redeem your voucher, enter the correct code and press Submit. Follow the on-screen prompts. Map ED You have already been selected and you can add to your choices in two categories: Point of interest, What are the streets and points of interest and Aerial, what is satellite view. In both categories, you can drag squares onto the map in the areas you wish to download. You can select four squares for each category; please make your selection reasonably. Once you have made all the necessary selections, the approximate file size will be displayed, and you should press the button Download. You will now be asked to enter your LightHouse card ID. Navigate to your new memory card in the search window and select the file named lighthouse_id.txt Your downloadable chart will be associated with this memory card going forward, please keep the packaging in a safe place and do not lose the memory card. Downloading will not happen instantly; depending on your selections, the server will prepare your downloadable LightHouse chart file. This will take time depending on the size, which can range from 1.9GB to 20GB with all extras. Do not close your browser or computer during the download; the chart file will be automatically downloaded to your computer's Downloads folder, and from there, copy it to the folder on the memory card. lighthouse_charts Check before copying, and the download is finished and the map file name is lighthouse_chart.rmc NB! Do not change the file name or type!

From 10.02.2025 we will be discussing the Gen2 generation of LightHouse charts and Jim has made a beautiful explanatory and informative video about that.

Frequently asked questions about the LightHouse map are set out below manufacturer's website.

The post Raymarine LightHouse merekaart MED (Vahemeri) appeared first on NavSystems.

]]> 8317