NMEA 2000 In-Line Terminator

NMEA 2000® Micro-C In-Line terminator

The Maretron Micro-C In-Line terminator allows the last device on the network to be connected directly to the end of the Backbone, while simultaneously acting as the network's end or start terminator. In NMEA 2000® systems, it is essential to use only special NMEA 2000® approved cables and connectors to ensure correct data transmission and network reliability. Terminators are very important NMEA 2000® network components. To integrate an NMEA2000 network with a Raymarine STNG network, use original adapter cables. Do not duplicate the power supply circuits or earths of different integrated networks.

Features:

• Rotary connector for good connections 
• Cast housing material/Colour: Thermoplastic PUR/Blue-grey
• Contact carrier material/colour: Thermoplastic PUR/Blue-grey
• Kontaktmateriaal/kap: messing/goud
• Coupling material/coating: brass/nickel

Electric:

• Power input: 10–30 V direct current
• Internal resistor: 120 ohms (1/2 W)

Environment

• Protection class: IEC IP68, NEMA 1, 3, 4, 6P

Fastenings

• NMEA: Approved by NMEA 2000®
• IEC: IEC 61162-3

Note:

The terminator is a very important NMEA 2000® network component! Ensure there are exactly 2 of them and that they are installed at the beginning and end of the network!

Instructions:

Download Maretron NMEA2000 Network Installation Guide.

Download more accurately Terminators and multi-port box guide.