NMEA 2000 bulkhead

NMEA 2000® Micro-C bulkhead

The NMEA2000 bulkhead fitting allows for a secure and watertight continuation of the network through a wall. The fitting has a Male connector on one end and a Female connector on the other. In NMEA 2000® systems, it is essential to use only dedicated NMEA 2000® approved cables and connectors to ensure correct data transmission and network reliability. To integrate an NMEA2000 network with a Raymarine STNG network, use original adapter cables. Do not duplicate the power supply chains or grounding of different integrated networks.

Features:

• Threaded connectors (Male/Female) for good connections
• Contact carrier material/colour: Thermoplastic PUR/Blue-grey
• Kontaktmateriaal/kap: messing/goud
• Coupling material/coating: brass/nickel
• Water resistance standard: IP67

Electric:

• Voltage rating: 250V 
• Load capacity 4 A

Environment

• Protection class: IEC IP68, NEMA 1, 3, 4, 6P

Fastenings

• NMEA: Approved by NMEA 2000®
• IEC: IEC 61162-3

Note:

An NMEA 2000 bulkhead connector is a good solution when you need to extend the NMEA 2000® network from inside the boat to the cockpit and there is an NMEA 2000 device in the cockpit that will be removed after sailing. For example, an instrument or chartplotter. The bulkhead connector has Male/Female connectors and all connections can be made with standard NMEA 2000 Male/Female cables. After removing the device, it is advisable to seal the bulkhead opening with a Micro-C blanking cap.

Instructions:

Download Maretron NMEA2000 Network Installation Guide.

Download Maretron terminators and multi-port box information sheet.