Pack of RV-212 RealVision 3D Bronze Thru Hull Transducers, Port & Starboard 12°, direct connect to AXIOM (2 x 2m, Y-cable and 8m extension cable)

When installing Raymarine RV transducers, you must be sure to observe the following:

To ensure the operational reliability and image quality of Raymarine RealVision 3D™ sonar, in addition to selecting the location shown in the manual, the following important aspects must be considered:

1. Power supply selection

Do not connect the Axiom RV, Axiom Pro RVX, or RVX1000 sonar system attached to a star. The engine may stall when starting Ping-pong, which may cause Disappearance of sonar image (the picture disappears).

2. Avoiding turbulence

Install sensors away from protrusions and water inlets, which cause Turbulence and air bubbles These are disturbing the clarity of the sonar image.

3. Exactly parallel installation

• Anduritele peab olema exactly the same distance from the dock.

• If one sensor is located in front of or behind another, it occurs Nike picture.

• The distance between the two sensors in the longitudinal direction must not exceed 2 metres. (preferably remaining within 1 metre of the centreline in both directions).

4. Installation depth

The foundations must be laid at least 300 mm below the water line both when standing and moving, to ensure continuous contact with water.

5. AHRS system malfunctions

On the RV-anduritel AHRS stabiliser, which compensates for boat movement and stabilises the sonar image.
Installation must be avoided near a strong magnetic field or metal parts, nt:

• Engine blocks

• Actuators

• Electrical panels

• Cables with thick wires, chargers, inverters

If the AHRS operation is disturbed, it can be Cancel plotter from menu.

Product Review: Raymarine RV-212 Bronze Through Hull Transducer Pack

Raymarine RV-212 on the RealVision 3D™ sonar technology 4-channel CHIRP transducer pack, and is suitable for boats with hull angle (deadrise) 6° to 18°. Installation through the hull, suitable for both inboard and outboard engine boats.

Functions

• DownVision™, SideVision™, CHIRP Fishfinder and RealVision 3D™

• AHRS sensor tagab stabiilse sonaripildi ka liikumisel

• Integrated water temperature sensor for quick and accurate measurements

• Low profile design – does not cause water resistance or cavitation

• No need for wedge blocks – internal ramp compensation

Suitability

• Suitable for boats with fibreglass and wooden hulls

• One sensor covers down, girl down result 180° underwater coverage

Includes:

• RV-212P Left Bronze Sensor (2m cable)

• RV-212S right-hand bronze sensor (2 m cable)

• RealVision 3D Y-cable

• 8 m extension cable (total length 10 m)

• Anti-rotation fixing kit

• Installation instructions