RV-312 RealVision 3D 12° sensor pair

What to monitor when installing Raymarine RV transducers

RealVision 3D™ transducers ensure maximum sonar image detail and accuracy only when correctly installed. In addition to the official installation guide, be sure to follow these principles:

1. Choose the correct power supply

Do not connect Axiom Pro RVX-i ega RVX1000 sonar module to the starter motor. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Precise and symmetrical installation is critically important!

• The hardware must be installed exactly parallel, the same distance from the stern of the boat.

• If one sensor is ahead of or behind another, The sonar image is shifting..

• Andurite The distance must not exceed 2 metres (preferably up to 1 metre on either side of the wedge).

4. Depth below the waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

5. Effect of magnetic fields on the AHRS system

On the RV-anduritel Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

• Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

• When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RV-312 plastikust läbi kere paigaldatav anduripaar, 12° a plug, 2 m Y-cable and 8 m extension cable

RV-300 seeria anduritel on DownVision™, SideVision™, 600-vatine kõrge CHIRP-sagedusega signaal ja 3D-sonari tugi. Anduril on sisseehitatud asendi ja suuna viitesüsteem (AHRS), mis stabiliseerib 3D-sonari kujutisi, kompenseerides automaatselt aluse liikumist. RV-300 seerial on ka sisseehitatud kiire reageerimisega veetemperatuuri andur kiirete ja täpsete näitude saamiseks.

RV-312 on parem- ja vasakpoordi andurite paar, mis on mõeldud paatidele, mille põhja kaldenurk on 6° kuni 18°. Iga anduri element on kallutatud 12° võrra, et kompenseerida kere kaldenurka. 

RV-312 anduripaaridel on pinnale kinnitatavate korpuste sees nihutatud sonarielemendid. Kallutatud elemendid tagavad sonari kiirte õige joondamise maksimaalse jõudluse saavutamiseks, kõrvaldades samal ajal takistuse ja turbulentsi, mis on seotud anduri paigaldamisega, mille kate on blokeeritud. Komplekt sisaldab Y-kaablit, mis ühendab sisemiselt kahte andurit ja 8-meetrist RV(M) andurite pikenduskaablit.    

Works with Axiom 2 Pro RVX series and RVX1000 external sonar module

Features:

• 600W traditional CHIRP
• High-performance Down and SideVision elements
• Aerodynamic housing with insulation board
• 2M Y-cable
• 8M extension lead
• RV-312 pak- ja tüürpoordi anduripaar sobib laevakerele mille kaldenurk on vahemikus 6° kuni 18°

Instructions:

Download RV 25-pin connector locking ring Installation guide

Download RV-300 seeria RealVision 3D Andurite paigaldusjuhend

Download RV-300 seeria Nose Cone Installation guide