Pack of RV-412 RealVision 3D Stainless Steel Thru-Hull Transducers, Port & Starboard 12°, Direct connect to AXIOM (2 x 2m, Y-cable and 8m extension cable)

When installing Raymarine RV transducers, you must be sure to observe the following:

The quality of your RealVision 3D™ sonar performance largely depends on a correctly executed installation. In addition to the recommendations provided in the manufacturer's manual, please follow these important points:

The power must not come from the starter battery.

Do not connect Axiom RV, Axiom Pro RVX ega RVX1000 Sonorous devices starfish to the side. Arising from engine start A power surge can cause the sonar image to disappear, which disrupts navigation and data storage.

2. Avoid installation locations that create turbulence

Install the sensors away from protruding parts, water intakes and other obstructions, which can cause turbulence or air bubbles, reducing sonar image quality.

3. Parallel and symmetrical installation

• Anduril must be installed exactly parallel yes I assume at the same distance from the shaft.

• If one sensor is ahead of or behind another, it can Slide the picture.

• The maximum distance between two sensors in the latitudinal direction is 2 metres (preferably up to 1 metre on either side of the wedge).

4. Installation depth below water line

The doors must be installed at least 300 mm below the water line, so that they would be in contact with water both when stationary and when moving.

5. AHRS sensor and magnetic interference

On the RV-anduritel Integrated AHRS (Attitude and Heading Reference Sensor), I'm sorry, but the input you provided is too short for me to understand what you would like translated. Please provide more text. compensates for the ship's movement it stabilises the sonar image.

• Avoid installation motors, electrical panels, chargers, inverters, and other strong magnetic sources nearby.

• The AHRS function can be used if necessary Cancel plotter from menu, if it doesn't work correctly.

Product Description: Raymarine RV-412 Stainless Steel Thru-Hull Transducer Pack (T70450)

Raymarine RV-412 on 4-channel CHIRP sonar system, which is designed to offer exceptionally accurate and detailed sonar imaging for both fishing and navigation.

Functions

• RealVision 3D™ 3D underwater sonar view

• CHIRP SideVision™ and DownVision™ – clear image of underwater structures

• High-frequency CHIRP sonar for identification of eggs

• Integrated AHRS automatic image stabilisation

• Integrated water temperature sensor

Technical specifications:

• Internal tilt compensation suitable for hull angles of 6° to 18°

• Low profile – reduces water resistance and eliminates the need for stabilisers

• Suitable for plastic, metal and wooden boats

• One sensor covers the left side and downwards, the other the right side and downwards 180° underwater coverage

Includes:

• RV-412P stainless steel left sensor (2 m cable)

• RV-412S Plastic right-hand sensor (2 m cable)

• RealVision 3D Y-cable

• 8 m extension cable (Overall length 10 m)

• Anti-rotation mounting kit

• Installation instructions