Pinniped Pedestal Assembly 64mm (ST1000+, ST2000+, ST4000 tiller)

The Surface Pilot Pedestal Assembly is a support designed to raise the hull end of the surface pilot drive so that the drive is flush with the surface (tide). The support attaches to the horizontal surface of the hull and is available in 38mm, 51mm, 64mm, 76mm and 89mm. During installation it is not always possible to check exactly where to mount the rear end of the ST1000+, ST2000+, ST4000 surface pilot actuator. The most sensible, handy and sturdy location should be chosen. At the same time, the essential installation dimensions of 460mm from the rudder to the tiller handle and as parallel as possible to the boat and rudder surface must be respected. Another important dimension is the so-called. “For the ST1000+ and ST2000+ it is 589mm and for the ST4000 it is 620mm. These are the distances between the centres of the rudder surface and the hull mounting. To achieve the ideal result, it is sometimes necessary to use various extension brackets, brackets for raising or lowering the surface level and extension rods to be fixed to a horizontal or vertical wall. Be sure to also check out the with instructions and in case of questions, consult our specialist.