STNG to SPX Moulded Cable 1 m

STNG to SPX Moulded Cable with special connector ACU200, ACU300 and ACU400 SPUR cable, through which the STNG network can be powered. This cable is not suitable for ACU100 and ACU150, and these two models do not allow power to be sent to the STNG network. The same cable is also suitable for older generation SPX autopilots. The Raymarine STNG SPUR cable is a spur cable through which devices (blue/black) are connected to the BackBone cable, which, as the name suggests, is the “spine” cable. The BackBone cable runs from the beginning to the end of the STNG network on the boat, and it is sensible to construct the network from cables of different lengths in such a way that breaks can be made and T-connectors or 5-Way connectors can be added in places where different STNG instruments need to be added. The BackBone is the main cable of the STNG network, and to start, continue, or end the network, STNG terminators, connectors, and 12V power must be added. Blue and white STNG cables cannot be connected incorrectly; in addition to colour coding, STNG cables also have different pin layouts. Familiarise yourself with the operating principles of the STNG (NMEA2000) network before using the product. NB! The blue and white nuts on the STNG connector sockets should only be turned a quarter of a turn. Corresponding markings are indicated on the product. Be sure to also familiarise yourself with this product. instructions and in case of questions, consult our specialist.