Raymarine SeaTalk1 - SeaTalkng converter - NavSystems Marine Electronics

The Raymarine SeaTalk1/SeaTalkng converter allows older devices using the SeaTalk1 communication protocol and new SeaTalkng (NMEA2000) devices to be connected into a single network. This converter is compatible with ST40, ST60+, Raystar 125 GPS and LifeTag MOB, etc. The converter operates bidirectionally.

SeaTalk ¹ SeaTalk ^No A converter is a practical solution for connecting these two networks.

Key features

Simple „plug-and-play“ connection to SeaTalk ng ^-ing
Works SeaTalk ¹ instruments, GPS antennae, autopilots and LifeTag.
SeaTalkng ^No The components included allow basic connection to the instrument system.
Simple network extension Raymarine SeaTalk ^No with accessories

In the catalogue are:

Converter only: SeaTalk ¹ SeaTalk ^No product: R52131

All Raymarine SeaTalk NG cables and connectors are colour-coded:

The blue socket of the connector is suitable for a blue/black cable, which is the BackBone, also known as the trunk cable. The white socket of the connector is suitable for a white/black cable, which is the SPUR, also known as the drop cable (or drop trunk cable). The wrong cable will not fit into the wrong socket. When preparing for installation, make a plan so that a BackBone cable of suitable length runs through everywhere where STNG (NMEA2000) devices are to be installed. Leave a break in important locations where a T-connector or a 5-way connector can be installed, and no instrument connected via a drop cable to a connector on the BackBone should be more than 5m away.

Instructions:

Download STNG to SeaTalk1 converter guide

Download STNG Network General Guide

Raymarine SeaTalk1 – SeaTalkng converter

Do you want advice?

Product delivery

3-year warranty

100% privacy guaranteed

Secure purchase