Raymarine ACU-100 Autopilot Drive Unit Control

Raymarine ACU-100 Actuator Control Unit (without clutch, for Type-0.5 12V actuators only)

The Raymarine ACU-100 is a component of the Evolution™ autopilot system and is designed for the Raymarine Type-0.5 hydraulic drive. (M81120) for. ACU100 has no clutch output. ACU-100 can also control Role-playing or Pinniped The ACU-100 is connected to the SeaTalkng network, and for the autopilot to function, an autopilot computer with a sensor is also required. EV1 and P70 or p70Rs dashboard Axiom series chartplotter. The ACU-150 has the option to connect a rudder angle sensor and it is reasonable M81105 add tansducer. The ACU-100 only operates on 12-volt DC systems and does not supply power to the STNG network.

Main features:

• Max. current rating: 7 A

• Connection: none (suitable for systems without a clutch)

• Connections: for steering sensor, power, motor, and earth

• Nominal supply voltage: 12 V DC (operating voltage range 10.8 – 15.6 V)

• SeaTalkng data connection: Yes

• Water resistance: IPX2 (panel), IPX6 (electronics)

• Dimensions: 180 x 140 x 52 mm

• Weight: 0.6 kg

Installation environment

• Operating temperature: -20°C to +55°C

• Storage temperature: -30°C to +70°C

• Relative humidity: up to 93%

Suitability

Ideally suited for smaller vessels that use a Type 0.5 drive unit and do not require a clutch. Check your steering cylinder compatibility with the Raymarine compatibility chart or consult an authorised dealer for advice.

Download the Evolution autopilot installation manuals:

EV1 and ACU Installation guide

Autopilot pump Installation guide

p70s and p70Rs Installation guide

Steering angle sensor Installation guide

Evolution p70 and p70Rs pilot user and operating manual

Further information about autopilots can be found Raymarine from the website