SeaTalk NG Backbone Kit

Overview

The SeaTalk^{All right} Backbone kit contains everything you need to construct and wire a basic SeaTalk^{All right} navigation network backbone on board your vessel. The kit contains the following components:

• A06031 SeaTalk^{All right} Terminators (Qty. 2)
• A06037 Backbone Cable, 20m
• A06036 Backbone Cable, 5m (2 units)
• A06028 T-Piece (Qty. 4)
• A06049 Network Power Cable
• 81300 SeaTalk^{All right} Reference Manual

ST70 Displays, transducer pods, transducers and network spurs are not included.

All Raymarine SeaTalk NG cables and connectors are colour-coded:

The blue socket of the connector is suitable for a blue/black cable, which is the BackBone, i.e. the main cable, the so-called spine, also known as: Trunk Cable
The connector's white housing is suitable for a white/black cable, which is a SPUR, or branch cable, also known as a Drop Cable.
The cable won't fit in the wrong socket. When preparing the installation, make a plan so that the correctly sized BackBone cable runs
through everywhere where NMEA2000 devices need to be installed. At important points there is an interruption where a T-connector can be installed.
or a 5-way connector and no instrument connected to the connector on the Backbone via a branch cable would be further than 5m away.

Download the Seatalk NG manual.

See manufacturer's website for more information.